I have flashed both v1 and v2 creator openwrt ubi images but it always fails at the same point.
Below is the logs it failing to boot. Once it reaches the final point it resets the creator board and fails.
Any help is appreciated. Thanks
SF: Detected W25Q16CL with page size 256 Bytes, erase size 4 KiB, total 2 MiB
Attempting to boot from firmware1
UBI: attaching mtd3 to ubi0
UBI: scanning is finished
UBI: attached mtd3 (name "mtd=1", size 256 MiB) to ubi0
UBI: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
UBI: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
UBI: VID header offset: 4096 (aligned 4096), data offset: 8192
UBI: good PEBs: 1017, bad PEBs: 7, corrupted PEBs: 0
UBI: user volume: 3, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 7/3, WL threshold: 4096, image sequence number: 341987811
UBI: available PEBs: 0, total reserved PEBs: 1017, PEBs reserved for bad PEB handling: 33
Loading kernel from volume...
Read 0 bytes from volume kernel to e000000
No size specified -> Using max size (3301376)
## Loading kernel from FIT Image at 0e000000 ...
Using 'config@1' configuration
Trying 'kernel@1' kernel subimage
Description: MIPS OpenWrt Linux-4.4.14
Type: Kernel Image
Compression: gzip compressed
Data Start: 0x0e0000e4
Data Size: 3205488 Bytes = 3.1 MiB
Architecture: MIPS
OS: Linux
Load Address: 0x80400000
Entry Point: 0x80400000
Hash algo: crc32
Hash value: afc004b3
Hash algo: sha1
Hash value: 7d8d5b35f40911898c7f41558b41c63615796f92
## Loading fdt from FIT Image at 0e000000 ...
Using 'config@1' configuration
Trying 'fdt@1' fdt subimage
Description: MIPS OpenWrt marduk_ca8210 device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x0e30eb90
Data Size: 24010 Bytes = 23.4 KiB
Architecture: MIPS
Hash algo: crc32
Hash value: 8455f297
Hash algo: sha1
Hash value: b5abd3da249268cb588fd99c5e183c782600b7ae
Booting using the fdt blob at 0xe30eb90
Uncompressing Kernel Image ... OK
WARNING: Invalid Wifi sta MAC address.
WARNING: Invalid Wifi ap MAC address.
[ 0.061304] console [ttyS1] enabled
[ 0.065196] bootconsole [early0] disabled
[ 0.071713] lkdtm: No crash points registered, enable through debugfs
[ 0.079291] ATU Clock Module Loaded
[ 0.091216] m25p80 spi1.0: s25fl016k (2048 Kbytes)
[ 0.096640] 4 cmdlinepart partitions found on MTD device spi-nor
[ 0.103365] Creating 4 MTD partitions on "spi-nor":
[ 0.108816] 0x000000000000-0x000000180000 : "uboot"
[ 0.116157] 0x000000180000-0x000000182000 : "data-ro"
[ 0.123397] 0x000000182000-0x000000184000 : "uEnv"
[ 0.130330] 0x000000184000-0x000000200000 : "data-rw"
[ 0.138422] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xb4
[ 0.145547] nand: Gigadevice SPI NAND 512MiB 3,3V
[ 0.150815] nand: 512 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 256
[ 0.161167] Bad block table found at page 130944, version 0x01
[ 0.169701] Bad block table found at page 130880, version 0x01
[ 0.176999] nand_read_bbt: bad block at 0x000018000000
[ 0.182748] nand_read_bbt: bad block at 0x000018040000
[ 0.188479] nand_read_bbt: bad block at 0x00001c340000
[ 0.194237] nand_read_bbt: bad block at 0x00001ffc0000
[ 0.200099] 2 cmdlinepart partitions found on MTD device spi-nand
[ 0.206884] Creating 2 MTD partitions on "spi-nand":
[ 0.212452] 0x000000000000-0x000010000000 : "firmware0"
[ 0.220425] 0x000010000000-0x000020000000 : "firmware1"
[ 0.231107] stmmaceth 18140000.ethernet: no reset control found
[ 0.237724] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 0.243375] Ring mode enabled
[ 0.246779] DMA HW capability register supported
[ 0.251850] Normal descriptors
[ 0.255543] RX Checksum Offload Engine supported (type 2)
[ 0.261674] TX Checksum insertion supported
[ 0.266425] Wake-Up On Lan supported
[ 0.270606] Enable RX Mitigation via HW Watchdog Timer
[ 0.279130] libphy: stmmac: probed
[ 0.282965] eth0: PHY ID 00221561 at 0 IRQ POLL (stmmac-0:00) active
[ 0.290718] 18120000.usb supply vusb_d not found, using dummy regulator
[ 0.298236] 18120000.usb supply vusb_a not found, using dummy regulator
[ 0.640127] dwc2 18120000.usb: EPs: 9, dedicated fifos, 4664 entries in SPRAM
[ 1.170643] dwc2 18120000.usb: DWC OTG Controller
[ 1.175941] dwc2 18120000.usb: new USB bus registered, assigned bus number 1
[ 1.183905] dwc2 18120000.usb: irq 56, io mem 0x00000000
[ 1.190280] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.197846] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.205927] usb usb1: Product: DWC OTG Controller
[ 1.211196] usb usb1: Manufacturer: Linux 4.4.14 dwc2_hsotg
[ 1.217404] usb usb1: SerialNumber: 18120000.usb
[ 1.223524] hub 1-0:1.0: USB hub found
[ 1.227779] hub 1-0:1.0: 1 port detected
[ 1.233339] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.240669] ehci-platform: EHCI generic platform driver
[ 1.247053] usbcore: registered new interface driver usb-storage
[ 1.255543] rtc-pistachio 18102000.timer-counter: rtc core: registered rtc-pistachio as rtc0
[ 1.267196] tpm_i2c_infineon 0-0020: 1.2 TPM (device-id 0x1A)
[ 1.384511] tpm_i2c_infineon 0-0020: TPM is disabled/deactivated (0x7)
[ 1.394284] pps_ldisc: PPS line discipline registered
[ 1.400508] imgpdc-wdt 18102100.watchdog: watchdog module last reset due to timeout
[ 1.410336] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.421207] Synopsys Designware Multimedia Card Interface Driver
[ 1.428739] dw_mmc 18142000.mmc: IDMAC supports 32-bit address mode.
[ 1.435905] dw_mmc 18142000.mmc: Using internal DMA controller.
[ 1.442552] dw_mmc 18142000.mmc: Version ID is 270a
[ 1.448092] dw_mmc 18142000.mmc: DW MMC controller at irq 46,32 bit host data width,32 deep fifo
[ 1.458004] dw_mmc 18142000.mmc: No vmmc regulator found
[ 1.463955] dw_mmc 18142000.mmc: No vqmmc regulator found
[ 1.490176] mmc_host mmc0: Bus speed (slot 0) = 87500000Hz (slot req 400000Hz, actual 397727HZ div = 110)
[ 1.520966] dw_mmc 18142000.mmc: 1 slots initialized
[ 1.528736] img-hash-accelerator 18149600.hash: Img MD5/SHA1/SHA224/SHA256 Hardware accelerator initialized
[ 1.540516] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.548615] pktgen: Packet Generator for packet performance testing. Version: 2.75
[ 1.560873] NET: Registered protocol family 10
[ 1.568181] NET: Registered protocol family 17
[ 1.573299] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.587440] Bridge firewalling registered
[ 1.591952] 8021q: 802.1Q VLAN Support v1.8
[ 1.601811] ubi0: attaching mtd5
[ 1.620151] usb 1-1: new high-speed USB device number 2 using dwc2
[ 1.832317] usb 1-1: New USB device found, idVendor=0930, idProduct=6545
[ 1.839804] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.847806] usb 1-1: Product: USB Flash Memory
[ 1.852814] usb 1-1: SerialNumber: 001D92AD671B5B8A060B099E
[ 1.860825] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 1.868323] scsi host0: usb-storage 1-1:1.0
[ 2.350337] random: nonblocking pool is initialized
[ 2.872133] scsi 0:0:0:0: Direct-Access USB Flash Memory PMAP PQ: 0 ANSI: 0 CCS
[ 3.231294] ubi0: scanning is finished
[ 3.251871] ubi0: attached mtd5 (name "firmware1", size 256 MiB)
[ 3.258590] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
[ 3.266369] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
[ 3.273984] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192
[ 3.281780] ubi0: good PEBs: 1017, bad PEBs: 7, corrupted PEBs: 0
[ 3.288568] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[ 3.296655] ubi0: max/mean erase counter: 7/3, WL threshold: 4096, image sequence number: 341987811
[ 3.306772] ubi0: available PEBs: 0, total reserved PEBs: 1017, PEBs reserved for bad PEB handling: 33
[ 3.317239] ubi0: background thread "ubi_bgt0d" started, PID 571
[ 3.326544] block ubiblock0_1: created from ubi0:1(rootfs)
[ 3.332760] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem
[ 3.341829] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[ 3.350009] rtc-pistachio 18102000.timer-counter: setting system clock to 1970-01-31 05:22:23 UTC (2611343)
[ 3.410968] internal_dac_supply: disabling
[ 3.669425] sd 0:0:0:0: [sda] 3966976 512-byte logical blocks: (2.03 GB/1.89 GiB)
[ 3.678268] sd 0:0:0:0: [sda] Write Protect is off
[ 3.684027] sd 0:0:0:0: [sda] No Caching mode page found
[ 3.689952] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 3.731504] dwc2 18120000.usb: dwc2_hc_chhltd_intr_dma: Channel 7 - ChHltd set, but reason is unknown
[ 3.741795] dwc2 18120000.usb: hcint 0x00000002, intsts 0x04000029
[ 3.749117] sda: sda1
[ 3.754518] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3.768784] VFS: Mounted root (squashfs filesystem) readonly on device 253:0.
[ 3.778086] Freeing unused kernel memory: 248K (80ad2000 - 80b10000)
[ 4.684376] init: Console is alive
[ 4.688524] init: - watchdog -
[ 6.001467] init: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 9.542838] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 635
[ 9.668178] UBIFS (ubi0:2): recovery needed
[ 9.902576] UBIFS (ubi0:2): recovery completed
[ 9.907809] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[ 9.916601] UBIFS (ubi0:2): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
[ 9.927699] UBIFS (ubi0:2): FS size: 231096320 bytes (220 MiB, 910 LEBs), journal size 11681792 bytes (11 MiB, 46 LEBs)
[ 9.939758] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB)
[ 9.947200] UBIFS (ubi0:2): media format: w4/r0 (latest is w4/r0), UUID E85AE87A-2C24-4C33-A96A-77BB5F7CF6B8, small LPT model
[ 9.964903] mount_root: overlay filesystem has not been fully initialized yet
[ 10.074384] mount_root: switching to jffs2 overlay
[ 10.095276] procd: - early -
[ 10.098659] procd: - watchdog -
[ 10.903466] procd: - ubus -
[ 10.991613] procd: - init -
Please press Enter to activate this console.
[ 11.358360] tun: Universal TUN/TAP device driver, 1.6
[ 11.364171] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 11.383258] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 11.398380] i2c /dev entries driver
[ 11.428548] NET: Registered protocol family 36
[ 11.442250] Starting module ca8210
[ 11.446301] ca8210 spi0.0: Inserting ca8210
[ 12.600180] ca8210 spi0.0: Fatal: No wakeup from ca8210 after reset!
[ 13.610058] ca8210 spi0.0: Synchronous confirm timeout
[ 13.615790] ca8210 spi0.0: cascoda_api_downstream returned -62
[ 13.622334] ca8210 spi0.0: failed to set sfr at 0xe1, status = 0xff
[ 13.629323] ca8210 spi0.0: tdme_chipinit failed
[ 13.740177] ca8210 spi0.0: Removing ca8210
[ 13.744757] ca8210 spi0.0: Switching external clock off
[ 14.760068] ca8210 spi0.0: Synchronous confirm timeout
[ 14.765863] ca8210 spi0.0: sync_down = 0, sync_up = 0
[ 14.771664] ca8210 spi0.0: Unregistered & freed ieee802154_hw.
[ 14.778166] ca8210 spi0.0: Test interface removed
[ 14.783589] ca8210: probe of spi0.0 failed with error -71
[ 14.789797] ca8210 module started
[ 14.821669] Bluetooth: Core ver 2.21
[ 14.825871] NET: Registered protocol family 31
[ 14.830910] Bluetooth: HCI device and connection manager initialized
[ 14.838136] Bluetooth: HCI socket layer initialized
[ 14.843684] Bluetooth: L2CAP socket layer initialized
[ 14.849347] Bluetooth: SCO socket layer initialized
[ 14.857224] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.863220] Bluetooth: BNEP filters: protocol multicast
[ 14.869139] Bluetooth: BNEP socket layer initialized
[ 14.878975] usbcore: registered new interface driver btusb
[ 14.888022] Bluetooth: HCI UART driver ver 2.3
[ 14.893075] Bluetooth: HCI UART protocol H4 registered
[ 14.898798] Bluetooth: HCI UART protocol BCSP registered
[ 14.904786] Bluetooth: HCI UART protocol ATH3K registered
[ 14.913396] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 14.920168] Bluetooth: HIDP socket layer initialized
[ 14.943501] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.961859] nf_conntrack version 0.5.0 (3860 buckets, 15440 max)
[ 15.114884] Register Fractional PLL to ATU Clock
[ 15.120378] ATU rate 147456000
[ 15.124076] ATU Clock Registered for cycle counter:0x8e8f6c48
[ 15.137817] Bluetooth: RFCOMM TTY layer initialized
[ 15.143641] Bluetooth: RFCOMM socket layer initialized
[ 15.149404] Bluetooth: RFCOMM ver 1.11
[ 15.178103] xt_time: kernel timezone is -0000
[ 15.200658] pistachio-card pistachio_audio_card: snd-soc-dummy-dai <-> 18100d00.spdif-out mapping ok
[ 15.213977] pistachio-card pistachio_audio_card: snd-soc-dummy-dai <-> 18100e00.spdif-in mapping ok
[ 15.227349] pistachio-card pistachio_audio_card: pistachio_internal_dac <-> 18100c00.parallel-audio-out mapping ok
[ 15.242361] pistachio-card pistachio_audio_card: snd-soc-dummy-dai <-> 18100a00.i2s-out mapping ok
[ 15.255521] pistachio-card pistachio_audio_card: snd-soc-dummy-dai <-> 18100800.i2s-in mapping ok
[ 15.275861] PPP generic driver version 2.4.2
[ 15.282867] NET: Registered protocol family 24
[ 19.009583] Loading modules backported from Linux version wt-2016-05-12-0-g7a54796
[ 19.018124] Backport generated by backports.git backports-20160216-0-ge3c56e4
[ 19.121097] hal_init: kmalloc success: 82c00000 an phy: 0x2c00000 end: 86c00000
[ 19.129275] bounce_addr: 0x2c00000 chunk_start: 0x0
[ 19.134790] hal_init: kmalloc success: 0
[ 19.140535] MAC ADDR: 00:11:22:33:44:55
[ 19.144821] SETUP HT CALLED
[ 19.147931] SETUP VHT CALLED
[ 19.151170] SETUP HT CALLED
[ 23.013949] eth0: device MAC address 46:2f:b1:48:26:fb
[ 23.626537] IPv6: ADDRCONF(NETDEV_UP): tayga-nat64: link is not ready
[ 23.838608] IPv6: ADDRCONF(NETDEV_CHANGE): tayga-nat64: link becomes ready
[ 25.776853] img/uccp420wlan/MCP_LOADER.ldr is loaded
[ 26.029117] img/uccp420wlan/MAC_LOADER.ldr is loaded